Cursor; Select The Horizontal Cursor Type - Promax OD-590 User Manual

5.3 CURSOR

Select the different cursor measurement. Vertical cursors measure time;
horizontal cursors measure voltage. For both vertical and horizontal cursors,
the cursor readout T1 and T2 (V1 and V2) show the selected cursor relative to
the centre horizontal (or vertical) LCD graticule; the readout ∆ symbol
indicates the distance (time or voltage) between of two cursors.

5.3.1 Select the horizontal cursor type.

Cursor
1. Press the Cursor key→F1. To select the channel, press F1
repeatedly.
2. To select the cursor to be activated, press F2 repeatedly.
3. To move the cursor, use the Variable knob.
4. The bottom right corner of the display shows the positions of two
cursors (T1 & T2), their time difference (∆), and the frequency (f).
Exemple:
01-2007
F 1
Source
F 2
Horizontal
USER'S MANUAL. OD-590/91/92
(4CH ) CH 1 / 2 / 3 / 4 /
MATH
( 2 CH ) CH 1 / 2 /
MATH
/
/
Page 40