Trigger; Use The Edge Trigger - Promax OD-590 User Manual

6.5 TRIGGER.

6.5.1 Use the Edge trigger

Select the Edge Trigger function to adquire the input signal over its
edge.
Operation
MENU
(Trigger)
1. Press the Trigger menu key. Press F1 repeatedly until "Edge"
appears.
2. To select the trigger source signal, press F2 repeatedly.
3. To select the trigger mode, press F3 repeatedly.
4. To go into Slope/Coupling menu, press F5.
5. To select the trigger slope, press F1 repeatedly.
6. To select the trigger coupling, press F2 repeatedly.
7. To select the frequency rejection mode, press F3 repeatedly.
8. To turn On noise rejection, press F4. To turn Off, press again.
9. To go back to the previous menu, press F5.
01-2007
(2CH)
CH1/2/
External/
Edge F 1
Line
(4CH)
CH1/2/3/4
Source F 2
Line
F 3
Mode Auto/
Normal/
Single
Auto Levell
Slope /
F 5
Coupling
USER'S MANUAL. OD-590/91/92
Slope F 1
Coupling
F 2
Rejection F 3 LF/HF/Off
Rejec.
F 4
Noise
Previous
F 5
Menu
ON/Off
Page 80