Introduction; Parts - Dexcom Pro Q User Manual

Chapter 1

1.1 Introduction

The Dexcom Pro Q Continuous Glucose Monitoring System tracks and stores a
participant's glucose data every 5 minutes. The glucose data is downloaded and
reviewed by a health assessment program. The program, which can review glucose
trends and may propose adjustments to a participant's medication, diet, or exercise as
needed for healthier living.
Dexcom Pro Q is blinded; the participant won't see their current readings. However, the
readings are recorded and are downloaded later.
An authorized data extraction tool downloads glucose data after a sensor session. See
dexcom.com/guides for instruction related to data extraction.
Please note: Images in this User Guide are representational and may differ from the
Dexcom Pro Q.

1.2 Parts

This section is a quick overview of each component. Specifics for each are in the
following chapters.
The Dexcom Pro Q has these parts:
• Single-use applicator and built-in sensor
• Single-use transmitter
Applicator
For safety, the applicator is packaged in a
sterile sealed pouch. The applicator inserts
the built-in sensor. The sensor is held in the
body by an adhesive patch. The transmitter
snaps into a holder on the outside of that
patch. The transmitter holder is held on the
body with the adhesive patch.
Dexcom Pro Q ™ System User Guide
Chapter 1: System Overview
|
System Overview
4