CHAPTER 2. Mounting boards
1.8 Dual Cabinet Installation Procedure
When installing a two cabinet system, the basic procedure is the same as for a one cabinet
system, described above. However, because both cabinets are identical when delivered, the
IP addresses of the second cabinet needs to be changed before they can be connected
together.
The Default IP addresses of each new cabinet are as follows:
Master IP address: 10.0.2.10
Gateway Address: 10.0.2.1
NetMask 255.255.255.0
Slave IP address: 10.0.2.12
When adding a second cabinet these need to be modified as described in Chapter 2.4
In addition the switch settings on the EPM module needs to be set.
1-8
© SAMSUNG Electronics Co., Ltd.