Figure 2.2 Removing The Cable Duct Cover (2); Figure 2.3 Removing The Screws; Figure 2.4 Removing The Top Cover - Samsung OfficeServ 7030 Installation Manual

CHAPTER 2. Mounting boards
3) Separate the cable duct cover.
4) Remove the two screws.
5) Push and lift the top cover to open the case. Take care not to damage the light guide
fitted to the underside of the top cover.
2-10

Figure 2.2 Removing the cable duct cover (2)

Figure 2.3 Removing the screws

Figure 2.4 Removing the top cover

© SAMSUNG Electronics Co., Ltd.