Spectral Display - Ametek 7280 Instruction Manual

Chapter 5, FRONT PANEL OPERATION
Figure 5-23, Options Menu
The options menu is used to install additional firmware options and shows which
options are already fitted. If an option is purchased at the same time as the
instrument, then the factory will install it and no further action is required. If however
it is bought at a later date then the user will need to provide details of the instrument's
serial number with his order. In return, he will be given a certificate with a unique
eight-digit Option Key number which can be used to enable the option on the
instrument.
The controls on the Options Menu operate as follows.
INSTALL OPTION
Pressing this key displays the keypad icon. Enter the Option Key number you have
been given using the numerical keypad, and press the to enter the number. The
symbol next to the option being installed in the list of available options on the right
hand side of the screen will change to a to indicate successful installation.
Pressing the Previous Menu key returns control to the Configuration Menu.

5.3.20 Spectral Display

When Main Menu 1 is displayed, pressing the Spectral display key accesses the
Spectral Display menu, a typical example of which is shown in figure 5-24.
5-39