Auxiliary I/O Menu - Ametek 7280 Instruction Manual

Chapter 5, FRONT PANEL OPERATION

5.3.27 Auxiliary I/O Menu

5-50
Pressing the Save settings, Restore settings or Delete memory keys causes
Select Memory Number and the Memory keys to be displayed. For example, when
the Save settings key is pressed, the menu changes to that shown in figure 5-31.
To use the user settings feature, proceed as follows:
Saving an Instrument Setting
Press the Save settings key, which will cause the Memory keys to appear.
Press either side of the
are to be stored. A message will be displayed while the settings are saved.
Restoring an Instrument Setting
Press the Restore settings key, which will cause the Memory keys to appear.
Press either side of the
settings are to be restored. A message will be displayed while the settings are
restored.
Deleting an Instrument Setting
Press the Delete memory key, which will cause the Memory keys or those
memories containing settings information to appear. Press either side of the
key next to the Memory number at which the settings are to be deleted. A message
will be displayed while this happens.
If the menu is inadvertently activated, pressing the Previous Menu key returns
control to Main Menu 2 without saving or restoring any settings.
When Main Menu 2 is displayed, pressing the Auxiliary I/O key accesses the
Auxiliary I/O menu, which is shown in figure 5-32.
Figure 5-31, User Settings Menu -
Save Settings
key next to the Memory number in which the settings
key next to the Memory number from which the