Ametek 7280 Instruction Manual page 75

This menu has seven controls affecting the RS232 computer interface, as follows:-
BAUD RATE
This control sets the baud rate to one of the following values:-
Baud Rate (bits per second)
75
110
134.5
150
300
600
1200
1800
2000
2400
4800
9600
19200
DATA BITS
This control sets the data transmission to one of four formats:-
Data Bits Description
7 + 1 parity 7 data bits + 1 parity bit
8 + 1 parity 8 data bits + 1 parity bit
8 + no parity 8 data bits + 0 parity bit
9 + no parity 9 data bits + 0 parity bit
ADDRESS
When more than one compatible instrument is connected in "daisy-chain" fashion by
coupling the AUX RS232 rear panel port on one to the RS232 port on the next, then
this control is used to define the instrument's RS232 address. All daisy-chained
instruments receive commands but only the instrument currently being addressed will
Chapter 5, FRONT PANEL OPERATION
Figure 5-19, RS232 Settings Menu
5-29