AXIOMTEK SBC82610 SERIES User Manual page 46

SBC82610 Half-size All-in-One CPU Card Series User's Manual
Typematic Rate (Chars/Sec)
This option refers to the number of characters the keyboard can type per
second. The default value is "6".
6
8
10
12
15
20
24
30
Typematic Delay (Msec)
This option sets the display time interval from the first to the second
character when holding a key. The default value is "250".
Security Option
This item allows you to limit access to the system and Setup, or just to
Setup. The default value is "Setup".
The system will not boot and access to Setup will be denied if the incorrect
System
password is entered at the prompt.
The system will boot, but access to Setup will be denied if the correct password
Setup
is not entered at the prompt.
NOTE:
To disable security, select PASSWORD SETTING at
Main Menu and then you will be asked to enter
password. Do not type anything, just press <Enter>
and it will disable security. Once the security is
disabled, the system will boot and you can enter
Setup freely.
OS Select for DRAM > 64MB
This segment is specifically created for OS/2 when DRAM is larger than
64MB. If your operating system is OS/2 and DRAM used is larger the
64MB, you have to select "OS 2", otherwise (under non-OS2), default is
NON-OS2. The default value is "Non-OS2".
40
6 characters per second
8 characters per second
10 characters per second
12 characters per second
15 characters per second
20 characters per second
24 characters per second
30 characters per second
250
250 msec
500
500 msec
750
750 msec
1000
1000 msec
Award BIOS Utility