AXIOMTEK SBC82610 SERIES User Manual page 45

SBC82610 Half-size All-in-One CPU Card Series User's Manual
Swap Floppy Drive
This allows you to determine whether to enable Swap Floppy Drive or not.
When enabled, the BIOS swaps floppy drive assignments so that Drive A
becomes Drive B, and Drive B becomes Drive A. By default, this field is
set to Disabled.
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive type, 40 or 80
tracks, installed in the system. 360Kb type is 40 tracks while 720Kb,
1.2MB and 1.44MB are all 80 tracks. The default value is "Enabled".
BIOS searches for floppy disk drive to determine if it is 40 or 80 tracks. Note
that BIOS can not tell from 720K, 1.2M or 1.44M drive type as they are all 80
Enabled
tracks.
BIOS will not search for the type of floppy disk drive by track number. There
will be no warning message displayed if the drive installed is 360K.
Disabled
Boot Up NumLock Status
This option enables and disables the numberlock function of the keypad.
The default value is "On".
On
Keypad functions confine with numbers
Keypad functions convert to special functions (i.e., left/right arrow keys)
Off
Gate A20 Option
The default value is "Fast".
The A20 signal is controlled by keyboard controller or chipset hardware.
Normal
Default: Fast. The A20 signal is controlled by Port 92 or chipset specific
Fast
method.
Typematic Rate Setting
This determines the typematic rate of the keyboard. The default value is
"Disabled".
Enabled
Enable typematic rate and typematic delay programming
Disable typematic rate and typematic delay programming. The system
Disabled BIOS will use default value of these 2 items and the default is controlled by
keyboard.
Award BIOS Utility 39