Cold Light Source; Fiber-Optic Light Guide - Leica RM2245 Instruction Manual

6. Optional accessories

6.11 Cold light source

1

6.12 Fiber-optic light guide

Fig. 69
8
2
Fig. 70
60
7
Fig. 68
6
5
4
3
The cold light source may be operated
at the power supply voltage specified on
the identification label (on the underside
of the instrument) only.
• Connect the power cable (1) to the connect-
ing jack on the rear of the device.
• Plug the power plug into the power socket.
Carefully read the instruction manual
provided separately before use!
• Attach the fiber-optic light guide (2) to the
adapter of the magnifying lens and secure it in
place in the bore (6) using the screw (5).
• Pull off the protective cap (3) from the end of the
fiber-optic light guide and keep it in a safe place.
• Insert this end into the opening provided (4) until it
engages with a slight click.
• Switch on the Cold light source using the power
switch (7).
• Remove the protective caps (8) and align the
light guide with the specimen.
Fig. 71, Leica rotary microtome with installed optional
accessories: magnifying lens and fiber-optic light guide
Instruction manual V 1.6 – 10/2009