Leica RM2245 Instruction Manual page 49

Rotary microtome
Hide thumbs Also See for RM2245:
Table of Contents

Advertisement

Knife holder E
13
11
A
Note on the knife holder E:
Setting of the clamping system of the clamp mount on the segment arch
To ensure a proper sectioning result, clamp
mount B must be securely clamped onto seg-
ment arch A.
The clamping is carried out using an eccentric
at the lever (11). The clamping force is adjusted
with the setscrew (12) on the underside of the
segment arch. The setting of the clamping is
carried out so that the clamping lever can be
rotated to the stop with constantly increasing
resistance.
Leica RM2245
10
B
12
Fig. 45
The knife holder E is an important precision component, the quality and
precise adjustment of which have a lasting effect on the entire function of
the microtome. In case of malfunctions or damages to the clamp mount, it
is always required to replace the clamp mount, including the pertinent
clamping lever.
Leica Biosystems offers special prices for new clamp mounts in case of
damages to the clamp mount after the warranty has expired.
In this way, perfect function of the device can be ensured over the course
of many years.
6. Optional Accessories
Lateral displacement (only for knife holder E)
The lateral displacement feature of the knife
holder base enables the use of the entire length
of the blade or knife, eliminating the need for re-
adjusting the knife holder. The knife holder E
consists of a segment arch A (with lever (11))
and the clamp mount B (with lever (10) and
ejector (13)).
The extreme left and right positions as well as
the middle position are each marked with a
notch point.
• To release the clamp, rotate the lever (11) on
the left side of the knife holder forwards.
• Move the knife holder sideways.
• To clamp, rotate the lever (11) back.
Adjust the clamping with a 2.5 mm Allen key at
the setscrew (12) so that the lever initially
"bars" when the lever is activated. Continue
turning the setscrew (12) a little bit (approx.
1
/
turn to the left or right), then check that the
4
lever no longer "bars", but also does not jam
"heavily".
(The language CD features a short video film for
this purpose.)
49

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents