Installing Your Water Optimizer
open the flow on
1-2. Water should pour from faucet, and nothing should be no leaking below. If there
are leaks, tighten connections with wrench, then turn off
9. With your hand, unscrew and remove the compression nut from the side of
3/8 in. Sink Adapter Valve.
Diagram 2.3(B).9 - Unscrew Compression Bolt From Sink Adapter Valve
10. Uncoil end of
KS-F
Cold Water Shutoff Valve
A
1/4 in. White PP Tubing,
Diagram 2.3(B).10 - Thread Tubing Through Compression Nut
by repeating
KS-H
and thread through the small end of nut.
Installing Your Water Optimizer 2-21
"Step 4" on page
faucet and proceed.
F