Getting Started
Preparation
Before we start tapping your water source, there are a few items you need to grab that
weren't included in your installation kit.
•
Sharp Knife or Scissors
•
Pliers, or Adjustable Wrench, or Open-End 7/16 in. Wrench (all installations),
1/2 in. Wrench (most installations), and 11/16 in. Wrench (*sink water source
installation only)
•
Container To Drain Water Into (i.e. bucket, bowl, or pitcher)
•
Flashlight or Lamp (if under sink installation area is poorly lit)
•
Drill (if drilling holes to run tubing is required)
or
1. Remove the Optimizer and filters from the packaging and set them aside.
2. Let's get started. If your plan is to utilize your Accessory Water Line as your source,
proceed below for Option A (Accessory Water Line). Alternatively, if you plan to use
your sink faucet cold water line as your source, turn to
or
Diagram 2.0.1 Additional Items Needed For Installation
7/16 in.
or
+
"Option B: Tapping Faucet
11/16 in.
1/2 in.
*
+
Getting Started 2-9