Kenmore KM1000 Installation Manual page 47

Installing Your Water Optimizer
6. If you've connected accessory appliances, use the same method from
remove
Acc. Output Port Plug
Water Optimizer. If you don't have any accessory appliances, proceed to
Filters" on page
7. Next, connect the open end of the section of
to your Accessory Line
the same way you did with the
C
8. Ensure both
then procced to
from
2-46.
to the Accessory Output Port
Source Line
1/4 in. Quick Connect Shutoff Valve(s)
"Installing Filters" on page
Diagram 2.7.8 - Ensure Valve Is Closed
Accessory Output Port
A
1/4 in. White PP Tubing
on the back of your Optimizer,
in
Step #5.
2-46.
Step #4
on the back of your
"Installing
are closed as shown below,
Installing Your Water Optimizer 2-45
to
connected