Installing Your Water Optimizer
Enabling Water Flow
This is the second to last stage of installation. In this stage, we will enable water flow at each
shutoff valve, one at a time to ensure there are no leaks.
1. If it's not already open, start by opening your
existing water source we first shut off).
2. If you're using a
3/8 in. Sink Adapter Valve
3. Ensure nothing is leaking between the last applicable valve above, and the shutoff valve
connected to your
4. Now open the valve on the Quick Connect Shutoff Valve connected to your
Source Input Port
Source, open the valve on
(if you haven't already opened it). Confirm there are no
Diagram 2.8.2 - Open Sink Adapter Valve
on your Optimizer, as shown below.
Water Source Valve
Installing Your Water Optimizer 2-53
(the valve on your