Table of Contents
Advertisement
Installing Your Water Optimizer
Tapping Water Source
Option A: Tapping Accessory Water Line
source
In this section, you will require
1/4 in. Compression To Quick Connect
1/2 in. wrench.
1. If nothing is currently connected to your water accessory line, skip forward to
#7 on page
2-14.
2. If appliance is connected to water accessory line, start by powering off and
unplugging the appliance.
3. Pull the refrigerator (or other appliance) away from wall sufficiently to allow access to
wall and floor behind it.
Diagram 2.3A.3 Pulling Back Appliance To Access Water Source Line & Valve
4. In most scenarios, your shutoff valve and connection will look similar to the first diagram
below. We've also included the second and third most common setups in the proceeding
diagrams. The instructions should remain accurate, regardless of which setup yours is, as
long as it incorporates a shutoff valve. Should the latter not be the case, you will have to
locate the shutoff valve before proceeding.
A
1/4 in. White PP
Adapter, and pliers, or an adjustable wrench or
Tubing, and may also need
Installing Your Water Optimizer 2-11
B
Step
Hide quick links:
Advertisement
Table of Contents
