System Operation - Intec FORCE 5150 Instruction Manual

System Operation:

1. Energize System
a. Pull EMERGENCY STOP out (i.e. into the ON position).
b. Start HONDA engine
i. Turn fuel valve in the ON position.
ii. Place choke in the ON position if
engine has not been running.
iii. Turn key to START position and
release once engine starts.
iv. Reduce choke when engine is
warming up until choke is in the OFF
position.
v. Move engine throttle to FULL
position.
NOTE: ENGINE HAS TO BE RUNNING AT FULL THROTTLE
FOR GENERATOR, BLOWERS, & FORCE 5150 ELECTRICAL
SYSTEM TO FUNCTION APPROPRIATELY.
2. Rotate the ROTARY CONTROL SELECTOR
SWITCH to the desired method to operate
system.
a. WIRELESS REMOTE
i. Operate system thru Intec's
Long Range Transmission
wireless remote.
b. WIRED REMOTE
i. Operate system thru
wireless remote with Intec's
exclusive long lasting
urethance jacked controls.
ii. Plug wired remote into the
REMOTE QUICK
DISCONNECT female connector.
Note: Unplug the wired remote when not using the wire remote to operate the FORCE 5150. When
unplugging, pull the metal tab back and turn ¼ turn, then remove male end from the REMOTE QUICK
DISCONNECT female connector.
c. OFF
d. BLOWER
i. Operate system thru its control panel. Blower(s) are activated in this setting.
e. BLOWER & AGITATOR
T: 303-833-6644
Original Language - English
800-666-1611
or
Instruction Manual
airfilter
THROTTLE
CHOKE ON
FUEL ON
www.inteccorp.com
| 9