Table of Contents
Advertisement
Once mounted and hardware is tightened, you are ready to fasten the open side of the Fresh Air Inlet
to the 10" diameter hose.
Upon completion, you will now have fresh, clean air from outside your vehicle used to cool the HONDA
EACH TIME YOU UTILIZE BLOWING MACHINE
1. Obtain appropriate protective equipment.
2. Attach hose to machine outlet using a hose clamp.
3. Open slide gate & place pin in desired opening.
T: 303-833-6644
Original Language - English
800-666-1611
or
engine.
Instruction Manual
www.inteccorp.com
|
8
Advertisement
Table of Contents
