Auto Return; Camera - ProFlight ORBIT PFBD201 User Manual

AUTO RETURN

The drone has an auto return feature which will return the drone to within
2 metres of the take off position. Please note it will return in a straight
line, and it is the responsibility of the user to make sure that there are no
obstacles in the return route.
AUTO RETURN BUTTON
Press the auto return button, and the drone will return to the
position of take off. Auto return can be cancelled at any point by
moving the right joystick in any direction.
AUTO RETURN – LOST CONTACT WITH CONTROLLER
If the drone loses contact with the controller, the drone will
automatically return to the position of take off. The controller will
continuously bleep to indicate the loss of contact.
LOW BATTERY AUTO RETURN
If the battery is low, the drone will automatically return to the
position of take off and the front of the drone will flash rapidly. If
the battery is out of power, all the lights will flash, quickly find a
suitable place to land before the drone carries out an emergency
land in its current position.

CAMERA

As well as recording onto your phone through the app, the camera can
also directly record onto a MicroSD card inserted into the drone (Not
Supplied).
The MicroSD card can be inserted into side of the camera housing on
the underside of the drone.
Pictures can be taken by pressing the right joystick button.
Press the left joystick button to start recording a video, press again to
stop recording.
13 of 20