Preparing For Take Off; Flight Instructions - ProFlight ORBIT PFBD201 User Manual

PREPARING FOR TAKE OFF

Once the controller has been calibrated the motors must be engaged.
Before doing this, please ensure that the unit is in position, unfolded,
and ready for flight.
TAKE OFF
There are two options for take off. It can be triggered by using the take
off button which will result in the drone hovering at a set height above
the ground. Alternatively the left joystick can be pushed forward.

FLIGHT INSTRUCTIONS

Before your first flight make sure you are familiar with the controls of the
aircraft.
Left Joystick – Throttle & Rudder
Right Joystick – Elevator & Aileron
Note: Should the aircraft be left for a while with no control inputs it will
go to sleep, simply press and hold the take off/land button to reactivate
the aircraft.
To do this push the left joystick to the
bottom right position at the same time as
pushing the right joystick to the bottom
left position.
The motors will then start to rotate.
11 of 20