Table of Contents
Advertisement
AIRCRAFT FUNCTIONS AND FEATURES
HEADLESS MODE
The aircraft can be made to fly in Headless mode by pressing the
headless flight button. This will make the aircraft fly without a front or
rear. It will fly in the orientation of the pilot. If you move the right joystick
right, the aircraft will fly right. Move the joystick left and it will fly left.
Move the joystick forwards and the aircraft will fly away from you and pull
it back to make it fly towards you. It does not matter which direction the
drone is facing in headless mode.
SPEED CONTROL
The drone has 3 speed settings. It will initially be set at 30%. By
pressing the speed button the speed of the drone can be adjusted. The
controller will bleep to indicate the speed it is set at after the button has
been pressed.
30% - 1 Bleep,
60% - 2 Bleeps
100% - 3 Bleeps
AUTO RETURN
The aircraft can be made to return in a fixed direction by pressing and
holding the return button. When the aircraft is turned on it will remember
the direction it is oriented and upon activation of the Smart Return
feature it will fly back in that direction.
NOTE: Be careful to orientate the aircraft with the rear tail facing
towards you if you want the aircraft to fly back towards you using the
smart return mode. You can retake full control of the aircraft at any time
by moving the control sticks. The aircraft will not return to where it
started, it will simply move in the direction it was orientated when turned
on.
3D ROLL
Before attempting a roll, please make sure the drone is at least 2 meters
above the floor and 2 metres below a ceiling.
Press the 3D roll button on the controller, then press the right lever in the
direction you want the drone to roll. Due to the design of the drone it
can only roll left or right and cannot roll forwards or backwards. For the
best performance use this within the first 5 minutes of flight.
11 of 15
Hide quick links:
Advertisement
Table of Contents
