Important Safety Instructions - Epever IPower Series User Manual

2. Important Safety Instructions

As an AC power supply equipment, the inverter's output voltage is
with the same level as that of household power plug. Mind the AC
output terminals, or you may get an electric shock and result in life
danger!
Attentions:
 Connect the DC input according to the requirement strictly. The
power inverter has a relatively wide input range, but too high or
too low input may cause problems even destroy the inverter.
 A reverse polarity connection will blow the fuses in the inverter
and may damage the unit.
 Do not expose the inverter to humid, flammable, explosive or
dust environment.
 Keep the inverter out of children touch.
 Inverter input is recommended to connect to battery, the min.
capacity of battery(expressed in AH) should be calculated in the
following way: 5times of the rated power of the inverter/battery
voltage. If for testing purpose, user should select DC power
supply current at least twice greater than that of the inverter
rated input to keep inverter normal operation. Use DC power
supply for testing may cause the damage of the inverter.
 When the inverter works continuously, its surface may become
very hot, please make sure the air ventilation clearance around
the inverter is more than 10cm. Keep away from the material or
device which may suffer from high temperature when the
inverter is working. Do not install the inverter in airproof location
and keep enough space around the inverter.
 The protective grounding must be connected to the ground. The
cross section of wire should not be less than 4mm
2
2
.