Table of Contents
Advertisement
IRC-6 Infrared Remote Control
The Festoon/Festoon VW is compatible with the IRC-6 infrared remote control from Chauvet DJ. To
activate IR mode, follow the instructions below:
1.
Press <MENU> repeatedly until SEr shows on the display.
2.
Press <ENTER>.
3.
Press <UP> or <DOWN> to select On or OFF.
4.
Press <ENTER> to confirm.
IRC-6 Operation
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
To adjust the speed of the automatic program:
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
To adjust sound sensitivity in Sound-Active mode:
Manual Color Control
To choose a specific color with the IRC-6:
To manually control the RGB or VW percentage:
Miscellaneous Operation
To adjust the total output level:
To adjust the strobe rate of the program:
To select only fading programs:
To black out the lights:
This will turn off all the lights until the button is pressed again.
NOTE: The IRC-6 will not respond to any inputs when Black Out is activated. If the
remote does not respond when a button is pressed, try pressing <BLACK OUT>.
You may have inadvertently activated Black Out.
Page 18 of 23
1.
Press <AUTO> on the IRC-6.
2.
Press <+> or <–> to choose between the different auto programs
1.
Press <SPEED> on the IRC-6.
2.
Press <+> or <–> to increase or decrease the speed of the program.
1.
Press <SOUND> on the IRC-6..
1.
Press <SENSITIVITY> on the IRC-6.
2.
Press <+> or <–> to increase or decrease the sound sensitivity.
1.
Press <MANUAL> on the IRC-6.
2.
Press any number between <0>~<9> to choose your color, or Press <R>
(red), <G> (green), or <B> (blue), to choose your color.
1.
Press <MANUAL> on the IRC-6.
2.
Press <R> (red/warm white), <G> (green/cool white), or <B> (blue/amber),
to choose your color.
3.
Press <+> or <–> to increase or decrease the percentage of each color.
1.
Press <%> on the IRC-6.
2.
Press <+> or <–> to increase or decrease the output level.
1.
Press <STROBE> on the IRC-6.
2.
Press <+> or <–> to increase or decrease the strobe rate.
3.
Press <STROBE> again to turn off the strobe.
1.
Press <FADE> on the IRC-6.
1.
Press <BLACK OUT> on the IRC-6.
Festoon/Festoon VW User Manual Rev. 2
O
PERATION
Advertisement
Table of Contents
