O
PERATION
Manual Color Mixing
To manually adjust a static color, follow the instructions below:
1.
Press <MENU> repeatedly until U-- shows on the display.
2.
Press <ENTER>, r** should appear on the display.
3.
Use <UP> or <DOWN> to adjust the red (Warm White) balance 0-100% (r--0_r255).
4.
Press <ENTER>, g** should appear on the display.
5.
Use <UP> or <DOWN> to adjust the green (Cool White) balance 0-100% (g--0_g255).
6.
Press <ENTER>, b** should appear on the display.
7.
Use <UP> or <DOWN> to adjust the blue (Amber) balance 0-100% (b--0_b255).
8.
Press <ENTER> to confirm all of your changes.
**The menu setting for r, g, or b will show the value last confirmed. Default is 255.
Dimmer Programs
To turn off the dimming, or change the dimming speed, follow the instructions below:
1.
Press <MENU> repeatedly until dIM shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select either OFF, dIM1, dIM2 or dIM3.
4.
Press <ENTER> to confirm.
Your Festoon/Festoon VW string comes with an IP rated cap meant to terminate
the end of the festoon/Festoon VW string. Retain this cap, and ALWAYS
terminate the open end of your string when being used outdoors or near
moisture.
Festoon/Festoon VW User Manual Rev. 2
Page 17 of 23