Table of Contents
Advertisement
Mounting
Controller
Before mounting the product, read and follow the safety recommendations indicated in the
The Festoon/Festoon VW Controller is IP20 rated. Keep it away from water, solvents
and chemicals. Take care to site it away from potential water hazards, for example,
avoid installing it where excessive humidity, water splatter or condensation may
occur.
Orientation
The Festoon/Festoon VW controller may be mounted in any position; however, make sure adequate
ventilation is provided around the product.
Rigging
•
Before deciding on a location for the product, always make sure there is easy access to the product
for maintenance and IRC or programming purposes.
•
Make sure that the structure onto which you are mounting the product can support the product's
weight. See the
Technical Specifications
•
When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
•
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
•
When power linking multiple products, mount the products close enough for power linking cables to
reach.
Mounting Diagram
Festoon/Festoon VW Controller
Page 8 of 23
for weight information.
Rear Keyhole Mounting: Measure and drill two
points 17 cm (6.7 in) apart. Use a level to ensure
accuracy while mounting.
M12 Mounting Hole
Festoon/Festoon VW User Manual Rev. 2
S
ETUP
Safety
Notes.
Safety Cable Pass-thru
Advertisement
Table of Contents
