Configuration (Standalone); Set # Of Festoon/Festoon Vw Strings; Static Colors; Automatic Programs - Chauvet DJ Festoon User Manual

Table of Contents

Advertisement

Configuration (Standalone)

Set the product in one of the standalone modes to control without a DMX controller.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.

Set # of Festoon/Festoon VW Strings

The Festoon/Festoon VW controller can control up to 3 Festoon/Festoon VW Strings. Follow the directions
below to setup your Festoon/Festoon VW:
1.
Press <MENU> repeatedly until Led shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select either Led1, Led2 or Led3.
4.
Press <ENTER> to confirm.

Static Colors

To select a static color for the Festoon/Festoon VW, follow the instructions below:
1.
Press <MENU> repeatedly until C- - shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to choose a static color (C--1 _ C-19)
4.
Press <ENTER> to confirm.

Automatic Programs

To run the Festoon/Festoon VW in automatic mode, follow the instructions below:
1.
Press <MENU> repeatedly until P-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select from the 38 auto programs (P-1_P-38).
4.
Press <ENTER> to make your selection.
Speed Control of Automatic Programs
To change the speed of an automatic program, follow the instructions below:
1.
Press <MENU> repeatedly until S-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to adjust the speed from slow to fast (S--1_S100).
4.
Press <ENTER> to confirm.

Sound Mode

To run the Festoon/Festoon VW in sound-activated mode, follow the instructions below:
1.
Press <MENU> repeatedly until Snd shows on the display.
2.
Press <ENTER> to confirm.
Sound Sensitivity Adjustment for Sound Mode
To lower or heighten the sensitivity of the sound mode microphone, follow the instructions below:
1.
Press <MENU> repeatedly until SeNS shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to adjust the sensitivity from low to high (u--1_u100).
4.
Press <ENTER>.
Page 16 of 23
Festoon/Festoon VW User Manual Rev. 2
O
PERATION

Advertisement

Table of Contents
loading

This manual is also suitable for:

Festoon vw

Table of Contents