HBM FS65 Installation Manual page 18

Sensor Installation
18
the standard cable lengths. In Fig. 2.18, an assembly of
sensors with an optimized cable length is presented.
Fig. 2.17
Fig. 2.18
Start by taking the cable B (Fig. 2.15) of the sensor on
the x axis and place it around the assembly as on
Fig. 2.19.
Then, take cable A of the sensor on the z axis and place
it around the assembly as on Fig. 2.20. Use an Optical
Adapter and attach both connectors.
A4265-2.3 HBM: public
FS65