HBM FS65 Installation Manual page 14

Sensor Installation
14
Fixing the Sensors
On the horizontal axis, use the provided M5x8 screws to
fix the accelerometer to the positioning block.
Ensure that the fibers are oriented at approximately 30º,
with the fibers that will be exiting the protection cover at
the lower position (see Fig. 2.7 and Fig. 2.8).
M5x8
Fig. 2.7
Fig. 2.8
Fig. 2.9
A4265-2.3 HBM: public
Approx. 30°
FS65