Default.settings - Burkert 8098 Operating Instructions Manual

Type 8098
Howtodothesettings
Table 16 shows the symbol displayed in the information bar, depending on the user level that is active on the
device, and what can be done with each type of user level.
symbol . user.level
1)
No symbol
Basic user
advanced.
user
installer
bürkert
Table 16: Possible login user levels
displayed in the information bar, only if the adjustment is protected through passwords.
1)
→
If you have forgotten your passwords, you can restore the default passwords with the Type 8920 Bürkert Com-
municator software. Refer to the related Operating Instructions.
9.6 Default settings
You can find the default settings of the device in the CANopen supplement for the Type 8098 at www.burkert.
com
→
Before making any changes to the settings, use the Bürkert Communicator software to print a pdf file with all
the default settings of the device.
Description
• No password is required.
• The menu items with the symbol
• Not all the menu items that are available with a higher user level are displayed.
• Password required, if the password protection is active (see chpt. 11.15).
Default password is 005678.
• The menu items with the symbol
• Not all the menu items that are available with a higher user level are displayed.
• Password required, if the password protection is active (see chpt. 11.15).
Default password is 001946.
• This level is active by default (and by default, password protection is switched
off).
• All the available menu items can be adjusted.
• Password required, if the password protection is active (see chpt. 11.15).
• Only for Bürkert service.
enable read-only access.
enable read-only access.
English
73