Axminster Trade AT2552BE Original Instructions Manual page 8

Main Assembly
Step 2 Line up the remaining holes in the two parts of
the assembly and secure using the remaining M6 bolts,
washers and nuts (20-22-25), securely tighten all fixing, see
figs 03-04.
Fig 03
Fig 04
Fig 05
Mounting the Bandsaw
WARNING!! WHEN MOUNTING THE UNIT,
WE STRONGLY ADVISE YOU GET THE
ASSISTANCE OF ANOTHER PERSON
BECAUSE THE BANDSAW IS HEAVY .
Lift the saw on to the stand and line up the pre-drilled holes,
see fig 05, secure using the eight M8 coach bolts (26) and M8
shoulder nuts (23), see fig 06.
23
26
Mounting the Emergency Stop Assembly
Step 1 Locate the two domed head Phillips screws (24) and M4
nuts (21), see fig 07. loosen the four Phillips screws from the
front of the emergency stop housing and very carefully open
the outer cover, see fig 08.
24
8
Fig 06
Fig 07
21
Fig 08