Axminster Trade AT2552BE Original Instructions Manual page 26

Electro-magnetic Motor Brake Switch
The electro-magnetic brake switch is located above the
NVR switch asssembly and has three positions, see fig 83.
• Position (0) engages the motor brake to prevent
the bandsaw blade from moving and to isolate the
bandsaw to prevent it from being started accidentally,
see fig 84.
• Position (1) releases the motor brake allowing the
blade to turn freely for changing and for tracking
proposes, see fig 85.
• Position (2) is for running the machine. Move the
selector switch to this position then press the 'Green'
button on the NVR switch to start the bandsaw,
see fig 86.
Fig 83
Electo-magnetic
motor brake switch
NVR switch
26
Fig 84
Fig 85
Fig 86