Table of Contents
Advertisement
Code
Model
Rating
Power
Blade Speed
Blade Length
Blade Width Min/Max
Max Width of Cut
Max Depth of Cut
Table Size
Table Height on Stand
Table Tilt
Table Height
Dust Extraction Outlet
Overall L x W x H
Weight
Your bandsaw is 90% assembled in order to reduce the
footprint of the machine for packaging, several items are
dismounted from the machine and need to be re-affixed.
HAVING UNPACKED YOUR ACCESSORIES
PLEASE DISPOSE OF ANY UNWANTED
PACKAGING PROPERLY. THE POLYTHENE
AND CARD IS RECYCLABLE.
WARNING! THE BANDSAW IS A HEAVY PIECE
OF MACHINERY, WE STRONGLY ADVISE YOU GET THE
ASSISTANCE OF ANOTHER PERSON
OR USE SOME SORT OF LIFTING DEVICE,
(HOIST, ENGINE CRANE), BEFORE YOU
ATTEMPT TO LIFT OR MOVE THIS MACHINE!
Stand Assembly
You will require the stand supports (02), stand support
brackets (03), M6 bolts (25), M6 shoulder nuts (22) and M6
flat washers (20), see fig 01.
Step 1 Line up the first two pre-drilled holes in the support
bracket (03) with the holes to one side of the support stand
(02) and secure using the M6 bolts, washers and nuts (20-22-25),
see fig 2. Repeat for the remaining stand and bracket.
NOTE: Make sure the support backets (03) are the correct
way round, otherwise the remaining holes in the stand
assembly will not line up.
03
02
7
Specification
700356
AT2552BE
Trade
750W 230V 1ph
800m/min
2,552mm(100.1/2")
3mm(1/8")/19mm(3/4")
340mm
200mm
495 x 360mm
1,060mm
-10° to +45°
490mm
100mm
445 x 610 x 1,753mm
85kg
Main Assembly
Fig 01
20
25
22
Fig 02
Continues Over....
Advertisement
Table of Contents
