Futurecom Mobexcom P25 User Manual page 68

Digital vehicular repeater
Hide thumbs Also See for Mobexcom P25:
Table of Contents

Advertisement

Inbound Call
Local Mode
M5
Mobexcom II
Mode
MPE
MSU
Outbound Call
O3/O5
PSU
PTT
RF
RSSI
System Mode
Talk Group
Trunking
April 2014
A call transmitted by Local PSU and received by the DVR.
DVR Mode which provides extended portable-to-portable voice
and data range by repeating Local PSU (optionally MSU)
communications without keying up the Mobile radio interfaced
to the DVR.
TM
XTL
2500 Control Head using CAN bus.
Analog Vehicular Repeater, NOT compatible with XTL
radios using CAN bus Control Heads such as the O3/O5.
Mobexcom II can be interfaced to XTL
Control Heads, Astro Spectra or MCS2000 Mobile Radios.
MSU / PSU Mode - A programmed combination of operating
parameters.
DVR Mode – OFF, SYSTEM or LOCAL (see DVR Mode)
Maximum Permissible Exposure.
Mobile Subscriber Unit - XTL
System Call received by the MSU.
TM
XTL
5000 Odyssey 3 or 5 Control Head using CAN bus.
Portable Subscriber Unit.
Push to talk. The PTT engages the transmitter (of the Portable
or Mobile radio and / or DVR) when pressed.
Radio Frequency. Part of the general frequency spectrum
10kHz - 10,000,000 MHz.
Received Signal Strength Indicator.
DVR mode which provides extended voice and signaling
communications between System Users and Local Portable
Users over the selected DVR channel / Mobile Radio Mode.
A group of radio users who communicate with each other by
using the same communication path.
The automatic sharing of radio frequencies by large number of
users based on communication path sharing for the length of a
conversation.
8A083X20 Rev. 16
TM
5000 using W-series
TM
TM
2500 or XTL
5000.
6881013Y38-P
User's Guide
TM
5000
Page 68 of 70

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Mobexcom P25 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents