8A083X20 Rev. 16
6881013Y38-P
User's Guide
Special Features Support
Fireground Signaling
The DVR can be programmed to repeat locally (when used in the Full-Duplex mode)
Fireground Signaling sent by the Local PSUs to a Fireground terminal located within the
DVR range at the same incident scene. Fireground signaling support can be enabled (by
DVR programming) on either Analog or Digital DVR channels and requires the use of
Fireground-enabled Local PSUs. In addition, the DVR may be programmed to repeat
Fireground Emergency Signaling only locally or / and to forward Fireground Emergency
received from a Local PSU to the System.
TPS Signaling
TPS Signaling support can be enabled on a DVR channel, operating in conjunction with
a Conventional P25, Trunking P25 or Conventional Analog Mobile Radio channel. This
option enables specially programmed Local PSUs to transmit TPS Leading and / or
Trailing IDs. TPS Emergency can also be received and processed by the DVRS when
on the corresponding TPS Enabled Analog channel.
April 2014
Page 63 of 70
Need help?
Do you have a question about the Mobexcom P25 and is the answer not in the manual?