Powering Up The Dvrs - Futurecom Mobexcom P25 User Manual

Powering up the DVRS

The DVR powers up together with the MSU.
The Power up Mode and Channel are programmable.
Depending on the programmed personality, the DVR can power up in one of the
following states:

DVR Disabled Mode, last selected DVR channel

OFF Mode

SYSTEM Mode, last selected DVR channel

SYSTEM Mode, preprogrammed DVR channel

LOCAL Mode, last selected DVR channel

LOCAL Mode, preprogrammed DVR channel

If the DVRS powers up on a 'Slaving enabled' mobile radio channel, the DVR will be
steered according to the Talk Group selected on the MSU. The steering may involve
both DVR Channel and mode change.
NOTE:
For a detailed description of the DVRS Modes of Operation, please refer to the
Modes of Operation
April 2014
paragraph of this document.
8A083X20 Rev. 16
6881013Y38-P
User's Guide
DVRS
Page 20 of 70