How To Select The Display Type - Honeywell LeaderLine DPR 100 C Product Manual

3.2.2 How to select the display type

Ten display types are available:
• ANALOG INPUTS
Analog input numbers, measured values and temperature actuation units will be displayed.
1 I
IN = mnemonic for analog input
Note: For linear actuations, if the lowest or the highest values are changed, the unit is no more
displayed.
• COMMUNICATION CHANNELS
Communication channel numbers, values will be displayed.
C 1
COM = mnemonic for communication channel
•
MATHS RESULTS
Maths channel numbers, maths results will be displayed.
M 1
M = mnemonic for maths results
• CHART TRACES
Channel numbers, measured values and engineering units (configured in the CHART matrix) will be
displayed.
1
If the channel is in alarm then the units
will be replaced by the alarm number
N 3
1 2
6 1
3 2 7
2 7 1
9 5 2
7 5 5
. 2 U
U
3-3
3. OPERATION
. ° C
0 . 5
0 . 8
N I T
N I T
A L 1
S
S
2