Honeywell LeaderLine DPR 100 C Product Manual page 30

• TAG NAMES AND TRACES
Channel numbers and tag names will be displayed.
1
then alternately channel number value and unit will be displayed.
1
If the trace is in alarm condition then the units
will be replaced by the alarm number
•
ONE BARGRAPH
A channel is represented by a 20 segment bargraph.
Channel number and bargraph will be displayed.
1 ! ! ! ! ! ! ! ! ! ! ! !
An "A" will be displayed at the end of the bargraph if the channel is in alarm.
When there is no alarm, the last digit shows the trend of the channel.
>
if the values are increasing,
•
TWO BARGRAPHS
(Only for 2 or 3 pen recorder)
Two channels are represented by a 2x20 segment bargraphs.
! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !
I
II ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !
The first digit represents the channel numbers displayed by the bargraphs.
("I" means trace #1, "II" means trace #2, "III" means trace #3)
An "A" will be displayed at the end of the line if one of the channels is in alarm.
T A G
3 2 7
<
if the values are decreasing.
N A M
. 2 U
U
3-4
3. OPERATION
E
N I T
N I T
A L 1
S
S
2
>