Honeywell LeaderLine DPR 100 C Product Manual page 62

FUNCTION
ANALOG
DEFINITION :
HOW TO MODIFY IT :
POSSIBLE CHOICES :
7. DETAILED CONFIGURATION
PARAMETER
S E N S O R
Basic sensor type used on each channel.
Select a new sensor.
Depends on the switches position on
the input board.
NOTE : Factory configuration.
All CH are delivered in position T/C,
mV, V, mA
THERMOCOUPLE : Sensor is a directly connected thermocouple for
which
internal cold junction compensation is required.
EXT COMP 50 : Thermocouple sensor is directly connected to a
remote
temperature compensation box fixed at 50
EXT COMP 60 : Thermocouple sensor is directly connected to a
remote
temperature compensation box fixed at 60
RTD : Sensor is a directly connected RTD or variable resistance.
Display only when switch on input board is set.
7-4
CLASSIFICATION
!!!
o C.
o C.