Honeywell LeaderLine DPR 100 C Product Manual page 68

FUNCTION
ANALOG
DEFINITION :
HOW TO MODIFY IT :
POSSIBLE VALUES :
NOTICE :
FUNCTION
ANALOG
DEFINITION :
HOW TO MODIFY IT :
POSSIBLE VALUES :
NOTICE :
7. DETAILED CONFIGURATION
PARAMETER
LOW VAL
Engineering value corresponding to low limit of the selected input
actuation range.
Enter a numeric value.
Up to 6 digits including negative sign and decimal point.
[-9999 ... 9999]
Modification is not available for any directly connected temperature
sensors, as this would adversely affect the linearization.
For linear and non-linear transmitters choose the value in
engineering units, which corresponds to the low range limit of the
transmitter.
PARAMETER
HIGH VAL
Engineering value corresponding to high limit of the selected input
actuation range.
Enter a numeric value.
Up to 6 digits including negative sign and decimal point.
[-9999 ... 9999]
Modification is not available for any directly connected temperature
sensors, as this would adversely affect the linearization.
For linear and non-linear transmitters choose the value in
engineering units, which corresponds to the high range limit of the
transmitter.
7-10
CLASSIFICATION
!!
CLASSIFICATION
!!