Panel Mounting The Recorder; Recommendations; External Dimensions And Cut-Out - Honeywell LeaderLine DPR 100 C Product Manual

2.3

PANEL MOUNTING THE RECORDER

2.3.1 Recommendations

This recorder is designed to operate under specific conditions. If you need more information, refer to the
product specification sheet.

2.3.2 External dimensions and cut-out

Prepare panel cut-out as detailed below:
Note: Maximum panel thickness 15 mm
!
CAUTION
The maximum temperature inside the cabinet should not exceed the ambient conditions
specific to the recorders. The recorder must be mounted into a panel to limit operator
access to the rear terminals.
Failure to comply with these instructions may result in product damage
2-3
2. INSTALLATION