10.3 Fault Reset
When the headset is not working properly or is
in faulty status for any reason, you may reset
by pushing the pin-hole reset button next to the
antenna. Insert a paper clip into the reset
pin-hole and press the reset button for a
second with light pressure. The LINKIN Ride
Pal III will be switched off. Restart the system
and try again. This will not restore the headset
to factory default settings.
10.4 Factory Reset
If you want to restore the headset to factory
default settings, use the Factory Reset in the
configuration menu. The headset automatically
restores the default settings and turns off.
Please refer to section 8.10, "Factory Reset" for
more details.
EN
31