Mobile Phone Pairing; Multipoint Phone Pairing; Configuration - Sena LinkIn Ride Pal III User Manual

Phone pairing
Multipoint Pairing
Phone selective pairing
Media selective pairing
Speed dial
Voice prompt
Sidetone
Noise control
Delete all pairings
Factory reset
Exit configuration

8.1 Mobile Phone Pairing

Voice Prompt
Factory Default
To go into mobile phone pairing mode, tap the
(+) Button or the (-) Button until you hear the
voice prompt, "Phone pairing". Please refer to
section 2.1 for details on mobile phone pairing.
If you tap the (+) Button or the (-) Button, you
can exit from the phone pairing mode.

8.2 Multipoint Phone Pairing

Voice Prompt
Factory Default
EN
"Phone pairing"
N/A
"Multipoint pairing"
N/A
23