Sena LinkIn Ride Pal III User Manual page 13

4. There are several ways to make a phone
call:
• Enter numbers on your mobile phone's
keypad and make a call. Then the call is
automatically transferred to the headset.
• Press the Center Button for 3 seconds in
stand-by mode to activate the voice
dialer of your mobile phone. For this, the
voice dialing function must be available
on the mobile phone. Refer to your
mobile phone manual for further
instruction.
Note:
1. If you have two phones connected to your
headset and you have an incoming call from
the second phone during the call of the first
phone, then you may still receive the call from
the second phone. In this case, the call from
the first phone is on waiting mode. If you end
a call, then it will automatically guide you to
the first phone call.
2. If you have a mobile phone and a GPS
connected to your headset, you may not be
able to listen to the GPS voice instruction
during the phone call.
EN
13