Intercom Pairing - Sena LinkIn Ride Pal III User Manual

2.4 Intercom Pairing

2.4.1 Pairing with Other LINKIN Ride
Pal III Headsets for Intercom
Conversation
The headset can be paired with up to three
other headsets for Bluetooth intercom
conversation.
1. Turn on the two headsets (A and B) that
you would like to pair with each other.
2. Press and hold the Center Button of the
headset A and B for 5 seconds until red
LEDs of the both units start to flash rapidly.
You will hear a voice prompt, "Intercom
pairing".
3. Tap the Center Button on any one of the two
headsets A and B, and wait unit the LEDs
of both headsets turn to blue and intercom
connection is automatically established.
The two headsets A and B are paired with
each other for intercom conversation. If the
pairing process is not completed within one
minute, the headset will return to stand-by
mode.
4. You can make other pairing between
headsets A and C, and between headsets
A and D by following the same procedure
as above.
5. The intercom pairing queue is 'Last-
Come, First-Served'. If a headset has
multiple paired headsets for intercom
conversations, the last paired headset is
set as first intercom friend. The previous
intercom friend becomes second intercom
friend, and third intercom friend.
EN
11