Table of Contents
Advertisement
1
Prepare the sound source.
Play Timer
Prepare the sound source, and then
press VOLUME +/ to adjust the
volume.
To start from a specific track or
audio file, create your own program
(page 40).
Rec Timer
Tune in the desired radio station
or call up the desired preset station
(page 27).
2
Select the timer set mode.
Press CLOCK/TIMER SET.
3
Set the timer.
Press / repeatedly to select
"PLAY SET?" or "REC SET?, " and
then press ENTER.
"ON" appears, and the hour
indication flashes.
4
Set the time to start playback or
recording.
Press / repeatedly to set the
hour, and then press ENTER. The
minute indication flashes. Use the
procedure above to set the minutes.
"OFF" appears and the hour
indication flashes in the display.
5
Use the same procedure as in
step 4 to set the time to stop
playback or recording.
6
Select the sound source when
using the Play Timer, or prepare
the USB device when using the
Rec Timer.
Play Timer
Press / repeatedly until the
desired sound source appears, and
then press ENTER. The display shows
the timer settings.
Rec Timer
Connect the USB device to the
(USB 2) port.
The display shows the timer settings.
7
Turn off the system.
Press /.
The system turns on before the preset
time.
If the system is on at the preset
time, the Play Timer or the Rec
Timer will not be activated. Do not
operate the system from the time the
system turns on until the playback or
recording starts.
To check the setting
Press CLOCK/TIMER SELECT, press
/ repeatedly until "PLAY
SELECT?" or "REC SELECT?" appears,
and then press ENTER.
To cancel the timer
Repeat the same procedure as above until
"TIMER OFF?" appears, and then press
ENTER.
Continued
GB
Hide quick links:
Advertisement
Table of Contents
