Sony FST-ZUX999 Operating Instructions Manual page 20

 FM lead antenna (Extend it horizontally.)
 AM loop antenna
 To wall outlet
 To front speaker (Right)
 To rear speaker (Right)
 To rear speaker (Left)
 To front speaker (Left)
 Antennas
Find a location and an orientation that
provide good reception, and then set up
the antennas.
Keep the antennas away from the speaker
cords, the power cord and the USB cable
to avoid picking up noise.
 Front/Rear speakers
Press down on the tab below the jack on
the speaker and insert the appropriate
speaker cord. Make sure the metal
leads (not the part covered with vinyl
insulation) are securely inserted into the
speaker jacks. Insert the end of the cord
marked with a black line into the  jack
and the cord with a colored tube (blue or
white) into the  jack. If the cords are
reversed, the sound will be distorted and
will lack bass.
Jacks on the front and rear speakers
Insert only the stripped
portion of the speaker cords
Cord with
a black
line ()
Make sure to match the projections on
the SPEAKER jacks on the unit and the
speaker cords, and insert the cords firmly
to the SPEAKER jacks.
The speaker cords can be fitted with a
0
GB
cable hook at the bottom-rear of each
front or rear speaker.
 Voltage selector
For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
Set VOLTAGE SELECTOR to 230 
240V, 220V or 120V.
Cord with a
colored tube
(white for front
speakers and
blue for rear
speakers) ()
Cable hook