Sony FST-ZUX999 Operating Instructions Manual page 48

When using the X-ROUND
MANUAL
Select
MANUAL
WAVE
MANUAL
FADER
MANUAL
BALANCE
To change the sound movement
Turn OPERATION JOG clockwise or
counterclockwise to change the sound
movement from one speaker to another
speaker when using the "MANUAL
WAVE, " "MANUAL FADER" and
"MANUAL BALANCE. "
To change the speed of sound
movement
Turn OPERATION JOG clockwise or
counterclockwise to change the speed
of the sound movement when using the
"AUTO WAVE, " "AUTO FADER" and
"AUTO BALANCE. "
To cancel the X-ROUND effect
Press X-ROUND ON/OFF repeatedly
until "X-ROUND OFF" appears.

GB
To output sound
In circular motion
around the room
Back and forth
between the front
speakers and rear
speakers
Back and forth
between the left
speakers and right
speakers
To normalize sound outputs from all
the speakers (X-BEAT)
Hold down MAX PAD when the X-
ROUND function is used.
The output sounds from all the speakers
become louder and same level while
holding down the button.
Notes
 If you cannot get desired sound effect, check
the speaker connections.
 X-ROUND function is turned off
automatically when:
 the system is turned off.
 the headphones are connected in DJ-off
mode.
 X-ROUND effect remains even when you
change the function.