Sony FST-ZUX999 Operating Instructions Manual page 44

Selecting the AUTO MP3
BOOSTER+ effect
You can enhance the sound quality of
MP3, WMA or AAC audio files during
playback. This is available only when
using the MP3 disc or USB device.
Press AUTO MP3 BOOSTER+ repeatedly
until "MP3 BOOSTER+" lights up.
Each time you press the button, the
display cyclically changes as follows:
BOOSTER OFF  BOOSTER AUTO
 BOOSTER OFF...
The default setting is "BOOSTER AUTO. "
Note
When an audio file is played back, the AUTO
MP3 BOOSTER+ function is automatically
activated if you have selected "BOOSTER
AUTO. "
Selecting the X-MAXIMIZER
effect
You can enhance the sound quality for
any source being output using the "X-
MAXIMIZER" function. This function
automatically adjusts the level of low
frequency band while minimizing sound
distortion.
Press X-MAXIMIZER repeatedly until
"X-MAXIMIZER" lights up.
Each time you press the button, the
display cyclically changes as follows:
MAXIMIZER ON  MAXIMIZER OFF
 MAXIMIZER ON...
The default setting is "MAXIMIZER
OFF. "

GB
Adjusting the specific
frequency band
You can adjust the sound by raising or
lowering the level of specific frequency
band.
Turn LOW dial clockwise or
counterclockwise to adjust the level of
low frequency band.
Turn MID dial clockwise or
counterclockwise to adjust the level of
medium frequency band.
Turn HIGH dial clockwise or
counterclockwise to adjust the level of
high frequency band.
The setting is entered automatically.
When using the DJ-off mode, you can
also adjust the frequency band using the
remote.
To adjust the frequency, press EQ on
the remote repeatedly to select "LOW, "
"MID" or "HIGH" and then press
/ repeatedly to adjust the
specific frequency band.