Manifold Mount Type - Omron D6F Series User Manual

6.2.3 Manifold mount type

The D6F-□A5 and D6F-P series have a manifold mount type. A manifold mount type, even
if there is no space in the straight pipe direction can be installed in a small space. Below
shows the dimensions of the bottom view and the connection example of the manifold mount
type D6F-□A5.
Clamping screw Clamping screw
MEMS Flow sensor (A5 Type) MEMS Flow sensor (A5 Type)
Gasket/O-Ring Gasket/O-Ring
Seal Seal
Product Type Port Style
D6F-□□A5 Manifold
D6F-P□□□□AM Manifold
11
Inlet Inlet
Fig.11
Manifold block Manifold block
Fig.12 Connection example for manifold mount type
Table 5 Recommended O-ring type
Recommended O-Ring Type
Designation JIS B 2401 P5
Inner diameter :4.80±0.15mm
Size
Cross section :1.90±0.08mm
Material NBR (for reference)
Designation JIS B 2401 P4
Inner diameter : 3.80±0.14mm
Size
Cross section : 1.90±0.08mm
Material NBR (for reference)
Bottom view Bottom view
D6F-□A5 Bottom view
O-Ring O-Ring
Inlet Inlet
Designation
Size
Material
Designation
Size
Material
D6F-series MEMS Flaw Sensor User's Manual (A286)
Outlet Outlet
Outlet Outlet
Reference O-Ring Type
ISO 3601-1 A0048G
Inner diameter : 4.87±0.15mm
Cross section : 1.80±0.08mm
NBR (for reference)
ISO 3601-1 A0037G
Inner diameter : 3.75±0.14mm
Cross section : 1.80±0.08mm
NBR (for reference)